You may be very familiar with the bottle blowing machine, which is mainly used to blow bottles. The bottle blowing machine is mainly used to blow plastic particles or softened liquid into bottles that people need through certain technological means. Compared with other raw materials, plastic hollow containers are not only light and cheap, but also very safe. In our company It can be seen everywhere in our life, especially in our home, all kinds of beverage bottles are made of plastic, which brings us more convenience. But what should we do before we use the bottle blowing machine?

1. Before using the bottle blowing machine, it is necessary to carefully check whether the moving parts are firm and whether the screws are loose. If so, it is necessary to tighten them in time to ensure the safety and stability in the use process.

2. For places with very strong impact force, it is necessary to check whether the belt transmission part is normal and whether there is serious wear and tear. It is necessary to replace and deal with it. In addition, it is also necessary to add lubricating oil to all parts to ensure a longer service life of mechanical equipment.

According to a certain order to maintain the bottle blowing machine, not only can ensure the normal production of the product, but also can extend the use time of the machine and equipment. Therefore, in the maintenance of bottle blowing machine, the following maintenance rules must be correctly implemented to improve product quality and productivity.

1. When the bottle blowing machine breaks down, it should be repaired as soon as possible. If we can make good use of the power failure or repair when replacing the product, it will help to reduce the downtime and not delay the production of the machine.

2. Parts affecting the quality of bottle blowing machine shall be replaced or repaired every half a year. If there are any parts that affect the quality of bottle blowing, they can be used for a longer time and the maintenance cost can be reduced.

3. If the bottle blowing machine needs to be repaired in a large area, it is better to repair it together when the glass furnace is repaired, so as to avoid the shutdown of the bottle blowing machine in the production process.